Wisconsin Front License Plate

Wisconsin Front License Plate: Do I Need A Front License Plate?

by Samuel Gitukui

The History of Wisconsin’s Front License Plate Requirement

Since the early 1900s, Wisconsin has required drivers to display two license plates on their vehicles – including the front license plate. This requirement was established to make it easier for law enforcement officers to identify and track vehicles. The front plate is used as a visual identifier, while the rear plate is used for automated scanning systems that can quickly read and record license plate numbers.

The first front license plates were issued in Wisconsin in 1911. These plates were made of metal and featured a unique number assigned to each vehicle registered in the state. In 1915, Wisconsin began issuing porcelain enameled plates with embossed numbers that could be seen more easily from a distance than their metal predecessors.

In 1941, Wisconsin changed its policy regarding front license plates by requiring all motor vehicles registered within the state to display both a front and rear plate at all times when operating on public roads or highways. This change was made due to an increase in traffic violations caused by drivers who had removed one of their two required license plates from their vehicle or failed to register them properly with the Department of Motor Vehicles (DMV).

Today, most states require only one license plate per vehicle; however, some states still require two—including Wisconsin—for law enforcement officers and automated scanning systems alike to accurately identify cars on public roads or highways more quickly and efficiently than if only one was present. As such, it is important for all drivers operating within the state of Wisconsin’s borders to adhere strictly adhere this requirement so as not to incur any penalties associated with failing to do so and properly register both sets of tags with the DMV before driving on public roads or highways within its borders.

Exploring the Pros and Cons of a Front License Plate in Wisconsin

The debate over whether or not to require a front license plate in Wisconsin has been ongoing for some time. On one hand, proponents of the requirement argue that it is necessary for law enforcement and public safety. On the other hand, opponents claim that it is an unnecessary expense and an infringement on personal freedom. In this article, we will explore both sides of the argument to help you make an informed decision about whether or not a front license plate should be required in Wisconsin.

Proponents of requiring a front license plate point out that it can be beneficial for law enforcement purposes. A visible front license plate makes it easier for police officers to identify vehicles involved in criminal activities such as hit-and-run accidents or fleeing suspects from crime scenes. Additionally, having two plates allows officers to quickly run checks on vehicles during traffic stops without having to wait until they reach their destination before running the check. This can save valuable time and resources when responding to emergency situations or conducting investigations into criminal activity involving motor vehicles.

Opponents of requiring a front license plate argue that there are several drawbacks associated with this requirement as well. For starters, many people find them unsightly and detract from the aesthetic appeal of their vehicle’s exterior design; especially if they have customized their car with aftermarket parts such as spoilers or body kits which may clash with the look of a standard issue state-issued tag frame/plate holder combination.

Furthermore, some people feel like this requirement infringes upon their personal freedom by forcing them into compliance with what could be seen as an arbitrary regulation imposed by government officials who may not understand how much money individuals have invested into customizing their cars’ exteriors. Finally, opponents also point out that installing two plates instead of one adds additional cost to vehicle owners who must purchase both plates separately rather than just one.

Ultimately, whether you choose to support requiring a front license plate in Wisconsin is up to you; however, understanding both sides of this debate can help ensure your decision is based on facts rather than emotion.

How to Install a Front License Plate on Your Vehicle in Wisconsin

Installing a front license plate on your vehicle in Wisconsin is a simple process that can be completed in just a few steps (just like the Iowa temporary license plate).

  1. First, you will need to purchase the appropriate mounting hardware for your vehicle. This includes screws and bolts that are designed to fit the specific make and model of your car or truck. You can find these items at most auto parts stores or online retailers.
  2. Next, locate the two holes on the front bumper of your vehicle where you will attach the license plate bracket. These holes should already be pre-drilled into most vehicles manufactured after 1998; if not, you may need to drill them yourself using an electric drill and the appropriate bit size for metal drilling.
  3. Once you have located these holes, use a screwdriver to attach each bolt from the mounting hardware into each hole until they are securely fastened in place. Then carefully slide one end of the license plate bracket onto each bolt until it is firmly secured against your bumper with no gaps between them.
  4. Finally, insert your license plate into its designated slot on top of this bracket and secure it with two screws provided by either manufacturer or purchased separately from an auto parts store or online retailer as mentioned earlier in this article. Once all screws have been tightened down properly, your front license plate installation is complete.

Creative Ways to Personalize Your Wisconsin Front License Plate

1. Add a Decal: Adding a decal to your Wisconsin front license plate is an easy and creative way to personalize it. Choose from a variety of designs, such as sports teams, animals, or even your favorite quote.

2. Paint It: Painting your Wisconsin front license plate is another great way to make it unique and show off your personality. Use acrylic paint in any color you like and add some fun designs or words for extra flair.

3. Get Crafty: If you’re feeling crafty, why not try making something special for your Wisconsin front license plate? You could use fabric scraps to create an applique design or use beads and wire to make a 3D sculpture that will stand out on the road.

4. Add Some Bling: Adding some sparkle can really take your Wisconsin front license plate up a notch. Try adding rhinestones in different shapes and sizes for an eye-catching look that will be sure to turn heads wherever you go.

5. Go Digital: For those who are tech-savvy, there are plenty of ways to customize digital versions of the Wisconsin front license plates online using software programs like Adobe Photoshop or GIMP (GNU Image Manipulation Program). With these tools at hand, you can easily create one-of-a-kind designs with ease.

What Are the Penalties for Not Having a Front License Plate in Wisconsin?

In Wisconsin, not having a front license plate is considered a civil violation and can result in a fine of up to $200. The exact amount of the fine will depend on the county in which the violation occurred. For more insight, you can learn more in our guide on the NJ temporary plates extension.

In addition to this, failure to display both plates may also result in points being added to your driving record. This could lead to an increase in insurance premiums or even suspension of your driver’s license if enough points are accumulated over time.

A Guide to Finding Replacement Parts for Your Damaged or Lost Wisconsin Front License Plate

If you have lost or damaged your Wisconsin front license plate, you may be wondering how to replace it. Fortunately, the process is relatively straightforward and can be completed in a few simple steps (just as you would with the Missouri front license plate).

  • First, contact the Wisconsin Department of Transportation (WisDOT) at 608-266-1466 or visit their website at wisconsindot.gov/Pages/dmv/vehicles/title-plates-regs/licenseplates.aspx for more information on replacing your license plate. You will need to provide proof of ownership such as a valid driver’s license or vehicle registration card when requesting a replacement plate from WisDOT.
  • Second, if you are unable to obtain a replacement from WisDOT, there are several online retailers that offer replica plates for sale that can be used as replacements for lost or damaged plates in Wisconsin. These replicas typically cost between $20 and $30 and come with mounting hardware so they can easily be attached to your vehicle’s front bumper area where the original plate was located.
  • Finally, if you would like an exact replica of your original license plate but cannot find one available online, there are several companies that specialize in customizing vintage plates with modern designs and colors so they look just like new again. These services usually cost around $50-$100 depending on the complexity of the design requested but will ensure that your car looks exactly as it did before losing its original front license plate.

In conclusion, replacing a lost or damaged Wisconsin front license plate is easy when following these steps: contact WisDOT for assistance; purchase an aftermarket replica; or customize an existing vintage model with modern designs and colors through specialized services offered by some companies online.

An Overview of the Different Types of Materials Used for Making a Wisconsin Front License Plates

Wisconsin front license plates are an important part of the state’s vehicle registration system. The plates must be made from durable materials that can withstand the elements and last for many years. There are several different types of materials used to make Wisconsin front license plates, each with its own unique characteristics and advantages.

The most common material used for making Wisconsin front license plates is aluminum. Aluminum is lightweight, corrosion-resistant, and relatively inexpensive compared to other metals such as steel or brass. It also has a long lifespan when properly cared for, making it an ideal choice for a long-lasting plate design.

Another popular material used in the production of Wisconsin front license plates is plastic or polycarbonate resin. This type of plastic is strong yet flexible enough to resist cracking or breaking under normal use conditions. It also offers excellent UV protection against fading due to exposure to sunlight over time, which helps keep your plate looking new longer than other materials would allow it to.

Finally, some specialty designs may require more specialized materials such as stainless steel or brass plating on top of aluminum baseplates to achieve certain aesthetic effects desired by customers who want something extra special on their vehicles’ front sides. No matter what type of material you choose for your Wisconsin front license plate design though – all will provide you with a durable product that will last through many years’ worth of driving adventures.

How Does Having Two Plates Affect Fuel Efficiency on Vehicles Registered in WI?

Fuel efficiency is an important factor to consider when purchasing a vehicle, especially in Wisconsin where the cost of fuel can be high. Having two plates on a vehicle registered in Wisconsin can have an effect on its fuel efficiency. This article will discuss how having two plates affects fuel efficiency and what drivers should consider when deciding whether or not to add a second plate.

The most obvious way that having two plates affects fuel efficiency is through increased drag. When there are two plates attached to the back of a car, it creates additional wind resistance which reduces the car’s aerodynamic performance and increases its overall drag coefficient. This means that more energy is required for the car to move forward, resulting in decreased fuel economy and higher emissions levels.

In addition to increased drag, having two plates also adds weight which further decreases fuel economy by requiring more energy from the engine for acceleration and deceleration as well as increasing rolling resistance due to added friction between tires and road surface. The extra weight also puts additional strain on other components such as brakes, suspension system, transmission, etc., leading to higher maintenance costs over time due to wear-and-tear caused by heavier loads being placed upon them regularly during the operation of the vehicle.

When considering whether or not adding a second plate is worth it for their particular situation drivers should take into account both short-term (increased drag) and long-term (higher maintenance costs) effects that come with this decision before making their choice so they can make an informed decision about what’s best for them financially in terms of overall cost savings versus potential benefits from improved aesthetics or convenience associated with having multiple license plates attached at once.


1. Is a front license plate required in Wisconsin?

Yes, a front license plate is required in Wisconsin.

2. What type of vehicle requires a front license plate in Wisconsin?

All motor vehicles registered in the state of Wisconsin are required to display two plates, one on the front and one on the rear of the vehicle. This includes cars, trucks, motorcycles, and trailers.

3. Where should I place my front license plate?

The front license plate should be securely fastened to the vehicle’s bumper or grill area so that it is clearly visible from at least 10 feet away from either side of the vehicle when it is parked or moving on public roads and highways within Wisconsin.

4. Are there any exceptions for displaying a front license plate?

Yes, certain types of vehicles may be exempt from displaying a valid registration sticker or decal if they are not used for commercial purposes such as farm equipment or antique vehicles over 25 years old that have been restored to their original condition and appearance as determined by an authorized representative from WisDOT (Wisconsin Department Of Transportation).

5. What happens if I don’t display my Front License Plate?

If you fail to display your valid registration sticker/decal along with your Front License Plate you may be subject to fines up to $200 plus court costs depending upon where you were stopped by law enforcement officers within Wisconsin’s borders. Additionally, failure to comply with this requirement could result in suspension/revocation of your driver’s privileges until all requirements have been met.

6. How often do I need to replace my Front License Plate?

You must renew your registration every year before its expiration date which can usually be found printed on both plates. If you fail to renew, then both plates will become invalidated until renewed again.

7. Can I get personalized Front License Plates?

Yes, personalized Front License Plates are available through WisDOT (Wisconsin Department Of Transportation) for an additional fee. These special plates allow drivers more freedom when choosing what their tag will say while still adhering to all applicable laws regarding acceptable language usage etc…

8. Are there any other requirements related to having a valid Front License Plate?

Yes, all motor vehicles registered within WI must also have current liability insurance coverage at all times while operating said vehicle(s) upon public roadways throughout WI state lines.

Related Posts